SK Hynix's (SKHY) new chip plant will house a $654 million supplier test line, with 49% funded by government

SK Hynix logo with the headline SK Hynix will open a test line for its suppliers

Key points

  • SK Hynix shows reporters its planned supplier test line
  • Korean governments cover 49% of Trinity Fab's cost
  • SK Hynix helps suppliers cover R&D costs when projects fail

SK Hynix is building a test line inside its first Yongin plant where smaller Korean chip suppliers can try out their materials, parts, and equipment under production-like conditions. Reporters toured the planned Trinity Fab (트리니티 팹) on November 10, and their stories appeared on November 16, Korea time.

The line gives suppliers a way to test products on chipmaking tools before trying to sell them. It will occupy about 3,305 square meters on the third floor of the Yongin fab, south of Seoul, with about 50 tools for lithography, etching, deposition, cleaning, and measurement.

The cleanroom is scheduled to open in May 2027. Testing for outside companies is expected to begin in the fourth quarter of 2027.

Public money covers almost half of Trinity Fab

Trinity Fab has a budget of 874.6 billion won ($654M). The central government is contributing 373.6 billion won ($279M), while Gyeonggi Province and Yongin city are adding 57.7 billion won ($43M). Together, their 431.3 billion won ($322M) covers 49 percent of the total, by our calculations.

SK Hynix's contribution is valued at 443.2 billion won ($331M) and consists of cleanroom space and staff provided for free, rather than cash. The company reported a record 83.3 trillion won ($62.3B) in operating profit for the third quarter alone.

A nonprofit foundation will run the line. Supplier fees haven't been set, but the foundation is considering charging only enough to cover operating costs.

Why Korean suppliers need a real production line

Korea makes some of the world's best memory chips, but many of the materials and tools behind them still come from abroad. Lee Ki-jung, CEO of the Trinity Fab Foundation, put the domestic sourcing rate for chip materials, parts, and equipment at around 30 percent.

A small Korean supplier's hardest step is proving its product works in mass production. Without a production line of its own, it can't get the test data, and without a record of past orders, big chipmakers pass it over.

Yang Ji-dong, a team leader in SK Hynix's Yongin planning team, showed reporters the space. "The wall is only there for security. On the other side of it is the cleanroom where Hynix will actually produce memory," Yang said.

"Trinity Fab isn't just a place that rents out equipment. Developing technology is like a marathon, and this is a place that runs the last part of the race with these companies so they can cross the finish line, which is getting their product into mass production," Yang continued.

Lee Ki-jung explained the goal in years. "It usually takes three to four years for an equipment maker to go from research and development to a customer's mass-production line," Lee said. "Our goal is to cut that by at least 30 percent through Trinity Fab."

The 1.4 trillion won in the headlines isn't new

Many of the November 16 headlines said SK Hynix will spend 1.4 trillion won ($1.05B) over five years on its suppliers. That money was first announced on July 2, when SK Group widened its supplier support to second- and third-tier suppliers. Trinity Fab was part of that July plan too.

What the November 16 reports added is detail. The money covers four stages, from research to testing, mass production, and sales.

SK Hynix pays even when a supplier's R&D fails

One part, also announced in July, is the R&D Challenge Compensation program (R&D 도전 보상제). It pays up to 50 percent of a supplier's early development cost up front, and settles the cost after the project ends, based on the results and the supplier's contribution.

That settlement covers projects that fail too. If a project works, SK Hynix looks at buying the product. If it fails, or doesn't lead to a purchase, SK Hynix grades the work on its technical contribution and how it was carried out, and compensates the supplier by that grade. The reports don't say how much of the advance a supplier keeps in that case.

"It's a program we run on the understanding that SK Hynix takes on the cost when development fails," said Lee Hyun-chul, SK Hynix's vice president in charge of purchasing strategy. The first projects will be picked before the end of this year.

Without a program like this, a supplier whose project fails pays for the attempt itself. Under this one, SK Hynix carries part of that cost.

There's also a loan program. On October 19, SK Hynix launched a 2 trillion won ($1.49B) export supply-chain guarantee with KB Kookmin, Shinhan, Woori, and Hana banks and the Korea Trade Insurance Corporation (한국무역보험공사). SK Hynix recommends the suppliers, and the state-run insurer backs their loans.

"About a month after we signed the agreement, 32 partner companies applied for loans," Lee Hyun-chul said. "We expect it to ease the financial burden on partners that need money for facilities like new equipment, and for operating costs."

What Trinity Fab can't do

Trinity Fab won't have extreme ultraviolet, or EUV, lithography machines, the tools used for the finest chip layers. Products for those steps will still need testing on SK Hynix's own lines. Government funding also winds down in 2031, and after that the foundation will have to cover its own costs.

Meanwhile, SK Hynix pointed to one supplier it has worked with before. TEMC (티이엠씨), a Korean specialty gas maker that SK Hynix picked for its technology-innovation company program in 2018, worked with SK Hynix to make neon gas in Korea for the first time in 2022, the year import prices for rare gases rose sharply. That year, SK Hynix cut 30 billion won ($22M) from its neon bill.

"It never would have happened without SK Hynix's full support and cooperation, and without its protection and nurturing," said Yu Won-yang, TEMC's CEO.

The quotes from SK Hynix, the Trinity Fab Foundation, and TEMC are translated from Korean. Won figures are converted at 1,338 won to the dollar, the Naver Finance rate on November 13, 2026.

Frequently asked questions

What is SK Hynix's Trinity Fab?

Trinity Fab is a test line SK Hynix is building on the third floor of its first fab in Yongin, South Korea, where small Korean makers of chip materials, parts, and equipment can test their products on about 50 real production tools. The cleanroom opens in May 2027, and testing for outside companies starts in the fourth quarter of 2027.

Who is paying for SK Hynix's Trinity Fab?

Trinity Fab costs 874.6 billion won ($654M). Korea's central government is putting in 373.6 billion won ($279M), Gyeonggi Province and Yongin city are adding 57.7 billion won ($43M), and SK Hynix is providing cleanroom space and staff valued at 443.2 billion won ($331M). Public money is about 49 percent of the total.

Is SK Hynix's 1.4 trillion won supplier package new?

No. SK Group first announced the 1.4 trillion won ($1.05B) five-year package on July 2, 2026, including SK Hynix's R&D Challenge Compensation program. That program pays up to 50 percent of a supplier's early development cost up front and settles the cost after the project ends, based on results and contribution, including when a project fails. The November 16 coverage added details from a press tour of Trinity Fab.

More on SKHY

Latest stories

Mia Park
Mia Park

Mia Park was born and raised in Korea and covers its markets and business news for AIStockWire, from the Kospi and Kosdaq to Samsung, SK Hynix, and the companies shaping the country's technology sector. She got her start writing for a Korean entertainment blog, a long way from stock filings, but has always enjoyed knowing what is happening back home before everyone else does.